How do you clean a magnetic whiteboard eraser?

After brushing off all the lose dust, mix a small amount of a mild detergent with water. Use the soft bristled brush, dipped in the water, to gently scrub the surface, working from top to bottom again but this time in circular motions. Be sure to rinse the eraser with cold water when you’re finished.

How do you clean a stained dry erase board?

How to Clean a Dry Erase Board

  1. Use a fresh dry erase marker to write over top of the stains, covering them completely.
  2. Wait a few seconds for the marker to dry.
  3. Wipe away all marks with a cloth or felt eraser.
  4. The dry erase ink will lift away the permanent ink.

How do you get marker off a whiteboard?

Using a cotton pad or swab, apply a small amount of rubbing alcohol to the board where permanent marks are present. As noted above, hand sanitizer or nail polish remover containing alcohol will also work for this purpose. Using your chosen substance, rub away the unwanted ink with circular or back and forth motions.

IT IS INTERESTING:  You asked: How is a permanent magnet created?

Can I use a magic eraser on a dry erase board?

If you are looking for a chemical-free way to clean your dry erase board, there are a few ways for you to keep your whiteboard clean. Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard’s surface while removing stains and ghosting. … If an old marker was used, there may be some stains/ghosting.

What is magnetic whiteboard eraser?

This Magnetic Whiteboard Eraser can be used to clean dry wipe marker ink from any whiteboard. The smart blue eraser has an easy to use grip and is also magnetic so you can leave it on your magnetic whiteboard when you are not using it. … The eraser includes a felt pad.

Does rubbing alcohol damage whiteboards?

To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.

How do you get old dry erase marker off?

Use rubbing alcohol.

Use 99% or 90% isopropyl rubbing alcohol for the best results. You can put rubbing alcohol directly on a paper towel or tissue and rub that on the old marks. Many hand sanitizers contain rubbing alcohol. Rub them directly on the old marks and wipe off of the board.

Do Clorox wipes ruin dry erase boards?

Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth.

IT IS INTERESTING:  Can you pick up coins with a magnet?

Why does dry erase marker remove Sharpie?

With a solvent like alcohol or acetone, though, permanent marker comes off a smooth surface pretty easily. That’s precisely what a dry erase marker contains: a solvent. … The solvent dissolves the permanent marker underneath and allows each part–dry erase pigment, permanent marker ink, and the solvent–to be wiped away.

What is best for cleaning whiteboards?

Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner and peroxide all work well too. Be sure to stay away from wax-based cleaners as they leave a pesky film on the whiteboard.

What should you not use magic eraser on?

4 things you should never clean with a Magic Eraser

  • Your car. A magic eraser can feel soft when it’s wet, but according to Apartment Therapy, it has the abrasiveness of 3000 grit sandpaper. …
  • Stone benchtops. Magic erasers can scratch delicate surfaces such as granite and marble benchtops and make them appear dull.
  • Nonstick pots and pans. …
  • Stainless steel.

What should you not put on a whiteboard?

DO NOT

  • Use abrasive erasers, cleaners, sponges or rags.
  • Use a chalkboard eraser.
  • Use a wet eraser.
  • Use a permanent Marker – Keep them away from your whiteboard.
  • Use tape on whiteboards.

Can you use baby wipes on a whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

IT IS INTERESTING:  Can anything become magnetic?

How do I clean my Artline magnetic eraser?

Mix a small amount of mild detergent, such as bleach-free dish liquid, with water. Dip the brush in the mixture and use it to gently scrub the felt. It is best to work from top to bottom again, scrubbing in circular motions. Rinse the felt completely with cold water.

How do you make whiteboard cleaner spray?

Simply mix one part water and one part alcohol in a spray bottle, squirt some on the board and rinse with a soft, damp cloth. If you need a little extra cleaning power, use the alcohol at full potency rather than diluting it with water.

What is a magnetic eraser?

Magnetized eraser block easily mounts to any magnetic whiteboard surface. Firm felt surface allows you to quickly erase ink markings.

A magnetic field